Creative 0404 Owner's Manual download pdf (Page 71)

6 - Working with ASIO

Connection Setups

E-MU Digital Audio System 63

Using External Sends & Returns

An External Send/Return breaks the signal at the insert point and sends it out to the

selected external destination such as a compressor, a stereo effect processor or any other

audio device. Any physical input or output can be used.

 To Insert an External Signal Processing Device:

1. Right-click on the insert chain and select the Insert Send/Return (Physical Output

and Input). The popup dialog box shown above appears.

2. Select the output and input you wish to use.

3. Connect your external audio gear to the appropriate analog or digital connectors.

4. If you’re using the analog outputs and inputs, you may have to adjust the levels in

the I/O Session Settings. See page 14. You can insert a level meter after the Send/

Return to make sure you’re getting a strong signal back from the external device.

5. If you’re using a digital Send/Return, make sure that the external digital device is

synchronized to the digital input. Otherwise, poor audio quality will result.

(Alternatively, you can synchronize PatchMix DSP to your external device in the System

Session Settings. See page 14.)

S/PDIF

Input

S/PDIF

Output

Outboard Signal Processor

The Send/Return Inserts allow you to connect your favorite external analog or digital gear.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 93 94

No comments

Creative 0404 Owner's Manual Page 71