Creative 0404 Owner's Manual Page 12
- Page / 94
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
2 - Installation
Software Installation
4 Creative Professional
Software Installation
Installing the E-MU 0404 Drivers
The first time you restart your PC after installing the E-MU 0404 PCI card, you will need
to install the PatchMix DSP software and E-MU 0404 PCI card drivers.
Windows 2000 or Windows XP
The software is not compatible with other versions of Windows.
E
Serial Number -
During the registration
process, you will be asked
to enter your serial
number. The serial
number is located on the
back of the box and on
the 0404 PCI Card.
1.
After you have installed your audio card, turn on your computer. Windows
automatically detects your audio card and searches for device drivers.
2.
When prompted for the audio drivers, click the
Cancel
button.
3.
Insert the E-MU software Installation CD into your CD-ROM drive. If Windows
AutoPlay mode is enabled for your CD-ROM drive, the CD starts running automati-
cally. If not, from your Windows desktop, click
Start
->
Run
and type
d:\ctrun\ctrun.exe
(replace
d:\
with the drive letter of your CD-ROM drive). You
can also open the CD and double-click
Ctrun.exe
located in the CTRun folder.
4.
The installation splash screen appears. Follow the instructions on the screen to
complete the installation.
5.
Choose
“Continue Anyway”
when you encounter the “Windows Logo Testing”
warning screen. See note below.
6.
When prompted, restart your computer.
Note About Windows Logo Testing
When you install the Digital Audio System drivers, you will see a dialog box that
informs you that the driver has not passed Windows Logo testing.
The Digital Audio System drivers are not signed because the driver does not support
some of the consumer audio features that the Microsoft driver signing program
requires, most notably Digital Rights Management.
However, the Digital Audio System drivers have been rigorously tested using the
same test procedures that a signed driver requires, and it passes in all important
categories, including those that measure the relative stability of the driver. So, it is
perfectly safe to install these drivers on your computer.
Uninstalling all Audio Drivers and Applications
At times you may need to uninstall or reinstall some or all of the audio card's applica-
tions and device drivers to correct problems, change configurations, or upgrade
outdated drivers or applications. Before you begin, close all audio card applications.
Applications still running during the uninstallation will not be removed.
1.
Click
Start
->
Settings
->
Control Panel
.
2.
Double-click the
Add/Remove Programs
icon.
3.
Click the
Install/Uninstall
tab (or
Change or Remove Programs
button).
4.
Select the E-MU 0404 PCI card entry, or the application entry and then click the
Add/Remove
(or
Change/Remove
) button.
5.
In the
InstallShield Wizard
dialog box, select the
Remove
option.
6.
Click the
Yes
button. Restart your computer when prompted.
7.
You may now re-install existing or updated E-MU 0404 PCI card device drivers or
applications.
- Owner's Manual 1
- Digital Audio System 1
- Owner’s Manual 2
- Table of Contents 3
- Creative Professional v 5
- 1- Introduction 7
- Notes, Tips and Warnings 8
- 2 - Installation 9
- Connector Types 10
- Install the Sync Card 11
- Software Installation 12
- 3 - PCI Card & Interfaces 13
- Analog Input Connections 14
- Using MIDI Thru 15
- The Sync Daughter Card Option 16
- 4 - The PatchMix DSP Mixer 17
- Mixer Window 18
- Mixer Block Diagram 18
- The Toolbar 19
- The Session 20
- Open Session 21
- Save Session 21
- Session Settings 21
- Using External Clock 22
- I/O Settings 22
- Input Mixer Strips 23
- Mixer Strip Creation 24
- Insert Section 25
- The Insert Menu 26
- E-MU Digital Audio System 19 27
- Meter Inserts 28
- Consumer 29
- Professional 29
- Trim Pot Insert 30
- Main / Monitor Bus 31
- Pre-Fader Aux Send 32
- Post-Fader Aux Send 32
- Main Section 34
- TV Screen & Selectors 35
- Main Bus 37
- Output Section 38
- 5 - Effects 39
- FX Insert Chains 40
- To Delete an FX Category 41
- To Rename an FX Category 41
- FX Edit Screen 42
- User Preset Section 43
- 96kHz Operation 44
- Core Effects Descriptions 45
- Frequency 46
- Low Shelf Mid Band High Shel 46
- 4-Band EQ 47
- Auto-Wah 48
- Signal path = Stereo 49
- Basic Controls 50
- Feedback 52
- Freq Shifter 53
- Leveling Amp 54
- Mono Delay 100 54
- Mono Delay 3000 55
- Phase Shifter 56
- Speaker Simulator 57
- Stereo Delay 100 57
- Stereo Delay 1500 58
- Stereo Reverb 59
- Early Reflections 59
- Late Reverb 59
- Vocal Morpher 60
- Phoneme A 60
- Phoneme B 60
- 6 - Working with ASIO 61
- Basic Recording 63
- Select the Audio Files Folder 64
- Set up your Inputs to Record 65
- The Cubasis Demo Song Screen 65
- Record a Track 66
- Record Another Track 66
- Direct Monitoring 67
- (recording) 68
- (playback) 68
- (back to PatchMIx DSP) 69
- Connection Setups 70
- Outboard Signal Processor 71
- E-MU VST E-Wire 72
- E-Delay Compensator 73
- PatchMix 74
- 7 - Appendix 77
- SMPTE Modes of Operation 78
- SMPTE Background 79
- Why use SMPTE? 80
- Striping SMPTE 80
- Avoiding SMPTE problems 80
- MIDI Time Code (MTC) 81
- Word Clock In/Out 81
- SYNC CARD 83
- DIGITAL BREAKOUT CABLE 83
- Digital Mixer 83
- ADAT Optical 83
- Useful Information 84
- Technical Specifications 85
- Dimensions & Weight 86
- Internet References 87
- Declaration of Conformity 88
- Compliance Information 89
- 82 Creative Professional 90
- Numerics 91
- E-MU Digital Audio System 83 91
- 84 Creative Professional 92
- E-MU Digital Audio System 85 93
- 86 Creative Professional 94
Related products and manuals for Soundbar speakers Creative 0404
(18 pages)
(10 pages)
(21 pages)
(2 pages)
Soundbar speakers Creative 510D User Manual
(22 pages)
(22 pages)
© 2020, manymanuals.com. All rights reserved. | 0.316 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals