Creative PS2000 Specifications download pdf (Page 5)

PS2000 Installation Instructions

For more information contact Hubbell Wiring Device Kellems

Toll free (800) 288-6000 or www.hubbell-wiring.com

P a g e | 4

Rev. 4.1--12.12.13

1.2 Product specifications

Power Specifications

AC Power Output (maximum) Level 2: 7.2kW (two dedicated circuits, 208/240V AC min. of 30A continuous)

AC Power Input Level 2: 7.2kW (two dedicated circuits, 208V/240V AC @ 30A per charging circuit)

Input Power Connections Single phase Line 1, Line 2 per circuit with common ground

Standby Power 20W

Recommended Panel Breaker Double pole 40A max breaker on dedicated branch for each circuit

Energy Metering Accuracy 3% @ 2 minute intervals

Output Charging Connector SAE J1772™ EV connectors on 18’ max. extended length coiled cord

Safety and Operational Specifications

Safety Compliance Complies with UL 2594, UL 2231, UL 1998, NFPA 70, NEC Article 625, ADA

Grounds Fault Detection 20mA CCID with auto retry (15 min delay, 4 tries)

Plug-Out Detection Power terminated per SAE J1772 specification

Surge Protection 6 kV @ 3,000 A

EMI Compliance FCC Part 15 Class A

Environmental Specifications

Enclosure Rating NEMA 3R per NEMA 250-1997

Operating Humidity Up to 100% over full operating temperature range

Operating Temperature -22⁰F to 131⁰F (-30⁰C to 55⁰C) ambient temperature

Terminal Block Temperature Rating 212⁰F (100⁰C)

Functional Interfaces

LCD Screen Resolution 800 x 600 PIXELS

Screen Characteristics 8.0” diagonal touch screen, sunlight readable and fingerprint resistant

Vertical Viewing Angle 124⁰ viewing angle

Horizontal Viewing Angle 120⁰ viewing angle

Card Reader ISO 7811 compliant

Network Specifications

Ethernet 10/100 Base-T Full Duplex Ethernet

Cellular 3G EVDO for Verizon

Network Communication Protocol TCP/IP, IPv4/IPv6, DHCP Addressing

Network Security HTTPS, SSL

Other Specifications

Approximate Shipping Weights 75 lbs for the component housing, 30 lbs for the installation kit

Component Housing Dimensions 9”x9”x24” plus front-mounted cord/connector assemblies

Reinforced Concrete Pedestal 12”x12”x29” above grade with 42” below grade, form provided

Wall Mounting Bracket 9”x11”x12” steel bracket, secured to approved wall with (4) 5/8” lag bolts

1 2 3 4 5 6 7 8 9 10 ... 24 25

No comments

Creative PS2000 Specifications Page 5