Creative DTT3500 Digital User's Guide download pdf (Page 7)

7

1. Read all of the instructions

before installing the speaker

system.

2. Attach the provided stand to the

Decoder Amplifier if you wish to

place the unit vertically. For

more details see “Decoder

Amplifier Placement” on page

16.

3. Connect the Satellites, Center

Speaker, and Subwoofer to the

Decoder Amplifier.

4. Connect the Dolby Digital

output of your digital program

source to the coaxial and/or

optical Dolby Digital input of the

Decoder Amplifier.

5. Connect your normal audio

signal sources via the Analog

Line In inputs. An owner of a

Sound Blaster Live! sound card

with a Digital DIN output should

use the supplied cable to connect

it to the Digital DIN input

instead.

6. Using the placement instructions

as a guide, position the Satellites,

the Center Speaker and

Subwoofer. Install the Desktop

Stands and Floor Stands as

appropriate. If you wish to

substitute a powered subwoofer

for the subwoofer that comes

with DTT3500 Digital, read

“Substituting a powered

subwoofer” on page 15.

7. Connect the Power Adapter to

the Decoder Amplifier.

8. Turn on the power. Use the

TEST function on the Remote

Control to position and balance

the speakers.

9. You may wish to experiment

with speaker placement briefly

before concealing the connecting

cables and making the

installation more permanent.

10. The unit is ready for you to

enjoy.

Speaker Connections

Insert one satellite’s plug into the

corresponding Speaker Output on the

Decoder Amplifier. Repeat this

process for the remaining satellites,

center speaker and subwoofer. For

more details see “Speaker Cable and

Stand Installation” on page 11.

If substituting a powered

subwoofer, connect it to the

Subwoofer Line Out. For more

details see “Substituting a powered

subwoofer” on page 15.

Power Adapter Connections

Insert the small DC connector into

the 15V DC IN jack on the back of

the Decoder Amplifier. Insert the

Power Adapter’s AC plug into an

appropriate receptacle.

Note: Set the Decoder Amplifier to

standby mode before unplugging or

turning off the power supply.

Installation Sequence

Speaker System

Connections

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Comments to this Manuals

No comments